Delivering Science Supporting Healthcare

Post-vasectomy analysis

Service
Test Background

The complete absence of sperm from an ejaculate is the most relevant criterion used to determine the successful surgical operation of a vasectomy procedure.

Clinical Indications

Following a vasectomy.

Turnaround time
14 Days
Sample & Container Required
A complete fresh ejaculate produced on site in one of the Andrology Department's production rooms.
Samples produced offsite will not be processed as of 1st June 2017
Notes

The Andrology service is open between the hours of 08.30 and 14.00 Monday to Friday (excluding bank holidays) and operates on an appointments system only.

Minimum detection limit

Minimum detection limit for this assay is 1300 sperm per mL.

Guidelines published in 2016 in a collaborative report by the Association of Biomedical Andrologists, British Andrology Society & British Association of Urological Surgeons state that:

Post vasectomy semen analysis should take place a minimum of 12weeks after surgery and after a minimum of 20 ejaculations. Samples should also be assessed within 4 hours of production and if non-motile sperm are observed, further samples must be examined within 1 hour of production. Assessment of a single sample is acceptable to confirm vasectomy success if all recommendations and laboratory methodology are met and no sperm are observed. Clearance can then be given.

Search test database

Test Results

Yes, we have a Pathology User Guide

Yes. Please email your request to Imperial.nwlpcustomerservice@nhs.net

Results are communicated to clinical staff and are normally not communicated direct to patients either on telephone requests or in written report. If you need to contact us please click here to view the contact details page

Please contact the Customer Service Team Monday to Friday from 8:30am – 6:00pm on 0203 313 5353. Alternatively, see the Pathology User Guide for how to contact the relevant department. If advice is not urgent you can also email your query to Imperial.nwlpcustomerservice@nhs.net

Additional tests may be added by discussion with the relevant laboratory. The time limit for adding additional tests to a sample already received in the laboratory will depend on the type of sample and the department it was sent to.

Information on the repertoire of tests performed by pathology, including reference ranges, turnaround times and specimen requirements, can be found in the test directory.

Different tests have different sample stability requirements. If a comment on results indicates that the sample was delayed, the links below will indicate which tests may have been affected. This information is for serum or plasma samples.

For some tests, the impact of delay is consistent and these are marked with an arrow:

↑ indicates tests where delayed centrifugation results in falsely elevated results and the true level is likely lower than that reported.

↓ indicates tests where delayed centrifugation results in falsely lowered results and the true level is likely higher than that reported.

If there is no arrow, the true level may be lower or higher than reported.

Please interpret results with caution and consider the impact of any uncertainty.

The comment on the report will state how delayed the sample was. Please click the relevant link  below to see which other tests may have been affected.

>8h >12h >24h >48h >72h

NWLP operates UKAS accredited medical laboratories as per the references below. The current scope of accreditation for all NWLP’s laboratories can be found on the UKAS website.

UKAS accredited medical laboratory/medical diagnostic service:

  • Clinical Biochemistry No. 8673
  • Haematology and Blood Transfusion No. 8674
  • Infection & Immunity Sciences (Including Immunology, Virology, Microbiology and Histocompatibility and Immunogenetics ) No. 8659
  • Cellular Pathology (Including Histopathology, Cytology and Molecular Pathology) No. 9615

If you require copies of our certificate of accreditation and associated documentation please contact Imperial.nwlpcustomerservice@nhs.net.

UKAS requires the laboratories to be accredited for a particular repertoire/scope (ISO15189), any changes or additions to repertoire require assessment by UKAS (extension to scope).

The BD Hospital Tube GuideBD GP Tube Guide and BD Paediatric Tube Guide provide visual references to the correct tube types and collection instructions.

Home testing

INSTRUCTION SHEET FOR BLOOD SAMPLE COLLECTION 

We also have two instruction videos available (one with subtitles and one without) – please click on the links to view the videos on Google.

VIDEO ON BLOOD SAMPLE COLLECTION (without subtitles)

VIDEO ON BLOOD SAMPLE COLLECTION (with subtitles)

Our accreditations

Upholding excellence in diagnostic standards

Our laboratories are accredited by the UK Accreditation Service (UKAS) against the international standard ISO15189:2022. UKAS is the accreditation body for the UK that assesses medical laboratories.

Find out more about our accreditations on the UKAS website.

UKAS website
Man in the lab handling a sample